Agência FAPESP

Researchers show a path to optimizing sodium supercapacitors

The element can offer performance similar to lithium and is more abundant and widely distributed, making the devices more sustainable and economically viable.

Researchers show a path to optimizing sodium supercapacitors
Raissa Venâncio from CINE: “The research helped us understand how each electrolyte impacts performance, stability, and lifespan, enabling us to guide the development of more efficient, safe, and durable devices – three essential factors for commercialization” (photo: CINE/press release)

Agência FAPESP* – Research conducted at the Center for Innovation on New Energies (CINE) is expected to contribute to the development of more efficient, safer, and more durable sodium supercapacitors. The results could accelerate the commercialization of these promising energy storage devices. CINE is an Applied Research Center (ARC) established by FAPESP and Shell in 2018. It is based at the State University of Campinas (UNICAMP), the University of São Paulo (USP), and the Federal University of São Carlos (UFSCar), and includes eight other Brazilian institutions.

Currently, commercial supercapacitors use lithium ions in their electrolytes; however, interest in using sodium ions is growing. Sodium is a more abundant and widely distributed element that can offer performance similar to lithium, making the devices more sustainable and economically viable, especially for large-scale applications.

Supercapacitors stand out among energy storage devices because of their power, or the speed at which they can charge and deliver energy. Due to this characteristic, supercapacitors are used in electric vehicles for systems such as regenerative braking, which converts kinetic energy from deceleration into electricity, and “start-stop” systems, which automatically shut off and restart the engine during brief stops. They can also be used in power grids to stabilize fluctuations caused by the intermittent nature of solar and wind energy.

However, supercapacitors have limitations regarding energy density, or the amount of electricity that can be stored per unit of weight or volume.

The study, which was published in the Journal of Materials Chemistry A and supported by FAPESP through three projects (17/11958-1, 14/02163-7, and 23/17560-0), demonstrated that the properties of the supercapacitor can be precisely tuned through the careful selection of the compound used in the electrolyte to dissolve sodium ions. “In our study, we were able to significantly increase the energy density of the supercapacitors by using mixtures of different solvents,” says Raissa Venâncio, who conducted the research as part of her Ph.D. at UNICAMP within the context of CINE.

The study involved researchers from UNICAMP, as well as scientists from other Brazilian universities (Mackenzie Presbyterian University, the Federal University of the Jequitinhonha and Mucuri Valleys, and the Eldorado Institute) and also from Portugal’s Nova University of Lisbon and Germany’s CARISSMA Institute of Electric, Connected, and Secure Mobility.

During the study, the researchers produced four types of solvents commonly used in work with sodium-based electrolytes and assembled small supercapacitors with each type of solvent. They studied the performance of the devices using an approach that combined classical electrochemical characterization techniques with “operando” electrochemical mass spectrometry.

In this way, the team was able to characterize the supercapacitors during operation, including charging and discharging. “We measured how much energy they store, how quickly they charge and discharge, and how their performance changes over time,” says Venâncio. At the same time, the authors monitored, in real time, the formation of gases inside the device – a relatively common phenomenon in batteries and supercapacitors. “Knowing which gases appear, when, and in what quantities is important because they indicate wear and tear, can reduce service life, and may even pose safety risks,” the researcher explains.

This approach not only made it possible to assess the performance of the supercapacitors, but also to understand the causes of failures. “This helped us understand how each electrolyte impacts performance, stability, and lifespan, enabling us to guide the development of devices that are more efficient, safer, and longer-lasting – three essential factors for commercialization,” says Venâncio.

According to Venâncio, the electrolytes studied are liquid and can easily be incorporated into systems currently used to produce lithium supercapacitors. Other promising solutions, such as solid or quasi-solid electrolytes, would require significant adaptations to the industrial process. Furthermore, Venâncio says that some of the studied electrolytes can be produced via simple, scalable methods using waste materials from Brazil’s petrochemical and mining industries. “This could open up a new market in Brazil utilizing local materials for a future battery factory,” the researcher anticipates.

The article “Tailoring electrolyte solvation for improved Na-based supercapacitor efficiency: An operando characterization approach” can be read at pubs.rsc.org/en/content/articlelanding/2026/ta/d5ta07938a. 

* With information from Verónica Savignano from CINE

 

  Republish
 

Republish

The Agency FAPESP licenses news via Creative Commons (CC-BY-NC-ND) so that they can be republished free of charge and in a simple way by other digital or printed vehicles. Agência FAPESP must be credited as the source of the content being republished and the name of the reporter (if any) must be attributed. Using the HMTL button below allows compliance with these rules, detailed in Digital Republishing Policy FAPESP.